Litelink Home  Fiber Optic Communications Systems Home   Contact   Map   Search

Products

Pdf Datasheet

Print Page

Email Page

User Manual

VM-2004     Video Distribution Amplifier    Click for larger image of Distribution Amplifier
For Video Distribution Applications  

 Video Distibution Amplifier Application    


The LiteLink® VM-2004 is a single input, wide-band video distribution amplifier designed for those applications where a single video source must be routed to four separate locations. Although not a fiber optic system, per se, the VM-2004 may be used with any fiber optic transmission system where multiple video signals are required.

In addition to providing three separate outputs, indicator LEDs are provided to continuously indicate the presence of an input video signal, the loss of the input signal and the presence of operating power making system troubleshooting simple.
 
Specifications Important Features
Compatibility NTSC, PAL, SECAM    · DC to 100 MHz Video
    Bandwidth
Video Bandwidth (per
 channel)
 DC to 100 MHz (+0,-3cB)    · Fully Adjustment Free
Input/Output Impedance  75 ohms  · Signal & Power Indicators
Video Input/Output Levels  1 volt peak to peak  · Stand-alone, DIN or Rack
    Mountable ( same unit)
  
Signal/Noise Ratio*  75 dB minimum  
Differential Gain*  0.5% maximum  
Differential Phase*  0.5? maximum
Field Tilt*  1% maximum
Output Channel Isolation >40 db
Indicators  Power, Signal, Alarm    
Signal Connectors  BNC
Operating Temperature -35 to +75 °C
Humidity <95% non-condensing
MTBF (per MIL HBK 217) >120,000 hours
Power Requirements  11-24 VAC/DC @150mA
Physical Size (mm)  5.0" x 3.0" x 1.0";
 (127 x 76 x 25.4)
   

*Measured with 1Km of 62.5u multimode fiber. 
  Note all specifications are subject to change without notice.


Copyright 2025


Liteway, Inc.

Voice: 1-516-931-2800

Email:  Contact Us